(24 bit at 44.1, 48, 88.2, 96, 176.4, 192 khz)
SONORE by Simple Design
|
. |
. |
. |
Lynx AES Audio Card for PCI or PCI Express
Slot:
(24 bit at 44.1, 48, 88.2, 96, 176.4, 192 khz)
The Lynx AES16 offers unprecedented AES/EBU channel capacity and routing flexibility in a single PCI card format. With support for up to 16 channels of input and output at sample rates up to 192 kHz, the AES16 turns your computer into a powerful digital router or patchbay with extensive flexibility and minimal cabling. Most importantly, the AES16 supports the emerging single-wire 192 kHz standard and is compatible with existing dual-wire AES/EBU devices. Up to four AES16’s can be installed in a single computer.
Integrates digital consoles, multi-channel A/D and D/A converters, and hard
disk recorders with computer-based workstations
LYNX AES16 FEATURES:
1. Sixteen-channel AES/EBU Digital I/O
2. 192 kHz / 24-bit Single-wire and Dual-wire Modes
3. SynchroLock™ Jitter Attenuation
4. Word Clock and Multi-card Synchronization
5. Powerful Mixing and Routing Engine
6. Low-latency Drivers for Windows and Macintosh
7. Cabling for Direct Digital Interface Yamaha, Apogee, Mackie, and other
Equipment
Order Below
Lynx L22 Audio Card for PCI
Slot:
(24 bit at 44.1, 48, 88.2, 96, 176.4,
192 khz)
The Lynx L22 audio card has the audio performance of a LynxTWO or Lynx Aurora converter in a two-channel format. The L22 provides two 192 kHz analog channels and two 96kHz digital channels with the same audio engine as LynxTWO. And although it only has four channels total, L22 uses the LynxTWO’s 16-channel software mixer and can add I/O channels using the optional LS-ADAT and LS-AES LStream daughter cards.
The L22 is an excellent choice for mastering and broadcast facilities where quality and stability are crucial. This professional audio interface card is also intended for use in the most demanding audio recording, post-production, and measurement applications.
Using proprietary circuit topologies and custom components in the analog stages along with the latest converter technology, the L22 achieves a 117 dB dynamic range. Most importantly, advanced noise-rejection design techniques are incorporated to maintain this performance from computer to computer.
The onboard digital mixer is extremely flexible allowing the L22 to adapt to any studio or workstation configuration. Each of the mixer's 16 outputs is capable of mixing signals from 16 physical inputs or 16 playback tracks with 32-bit precision.
As with other Lynx products, the L22 provides unprecedented compatibility with a wide range of platforms and operating systems. Lynx device drivers are developed in-house to insure quality and robust operation.
LYNX L22 FEATURES:
1. 200kHz sample rate / 100kHz analog bandwidth (Supported with all
drivers)
2. Two 24-bit balanced analog inputs and outputs
3. +4dBu or -10dBV line levels selectable per channel pair
4. 24-bit AES3 or S/PDIF I/O with full status and subcode support
5. Sample rate conversion on digital input
6. Non-audio digital I/O support for Dolby Digital® and HDCD
7. 32-channel / 32-bit digital mixer with 16 sub outputs
8. Multiple dither algorithms per channel
9. Word, 256 Word, 13.5MHz or 27MHz clock sync
10. Extremely low-jitter tunable sample clock generator
11. Dedicated clock frequency diagnostic hardware
12. Multiple-board audio data routing and sync
13. Two LStream™ ports support 8 additional I/O channels each
14. Compatible with LStream modules for ADAT and AES/EBU standards
15. Zero-wait state, 16-channel, scatter-gather DMA engine
16. Windows 2000/XP/XPx64/Vista/Vistax64: MME, ASIO 2.0, WDM, DirectSound,
Direct Kernel Streaming and GSIF
17. Macintosh OSX: CoreAudio (10.4)
18. Linux, FreeBSD: OSS
19. RoHS Compliant
20. Optional LStream Expansion Module LS-ADAT: provides sixteen-channel 24-bit
ADAT optical I/O (Internal)
21. Optional LStream Expansion Module LS-AES: provides eight-channel 24-bit/96kHz
AES/EBU or S/PDIF digital I/O (Internal)
Order Below